 |
||
| TROUBLE | POSSIBLE CAUSES | POSSIBLE SOLUTIONS |
| 9. Back charging powder layers are repelled from part in spots. | 1. Voltage too high. | 1. Turn down voltage setting. |
| 2. Gun positioned to close to part. | 2. Change gun placement away from part. | |
| 3. Poor ground. | 3. Check ground. See powder delivery, charging section, No2. | |
| 4. Powder too fine. | 4a. Too much reclaim added to virgin powder. | |
| 4b. Virgin powder pulverized too fine by manufacturer. | ||